Choosing A New Water Heater

How to Pick A Water HeaterIf you need a new water heater for your home, then make sure you select a water heating system that will provide you with plenty of hot water, as well as one that is energy efficient. This means you’l want to have a look at the different types of water heating systems and figuring out which size you need and what fuel source you will be using. Read on to learn more about the different types of water heaters, and we will provide you with other useful information.

1. Types Of Water Heaters– There are a number of water heaters out there, and this includes conventional storage water heaters, which have a reservoir of hot water. There are also tankless heaters, which heat water without using a storage tank. There are also heat pump water heaters that don’t generate heat directly, as they move heat from one place to another, and there are solar heaters, which uses heat from the sun to provide hot water. There are also tankless coil/indirect water heaters that heats water by using your home’s space heating system.

2. Selection Criteria- There are a number of things to consider when it comes to choosing the best type and model heater, and this includes the type of fuel that you use for your water heating. The type of fuel you’ll use will impact costs associated with using your water heater. The fuel source also plays a role in how energy efficient the heater will be.

Size is important too because you want a water heater that is big enough to provide your home with enough water, so make sure you properly size a water heater before buying one. Another thing to consider is a water heater’s energy efficiency because you want to get the most out of your water heater, but you don’t want to spend a lot of money. Also, consider costs because you don’t want to be surprised by a heater’s annual operating costs, so compare annual operating costs between different types of water heaters.

Find out if there is anything you can do to reduce the amount of hot water you use. There may be other things you can do. This includes using a drain water heat recovery, which may save you some money on your bill.

3. Fuel Types- When it comes to choosing a new water heater, you want to consider what energy source you’ll use. Keep in mind its cost and availability. Annual operation costs will be affected by the type of fuel or energy you use, but so does the water heater’s energy efficiency and its size.

The type of fuel and the availability of that fuel may help you choose a water heater. There are a number of water heat options out there. The next few paragraphs will discuss what some of those options are.

One of the most widely available fuel source for tankless heaters and heat pump heaters is electricity. Not only that, but electricity can be combined with water and space heating systems. This includes indirect and tankless coil heaters.

Fuel oil is available in certain parts of the USA. It’s used to provide fuel to a combo of water and space systems. It’s also used to power conventional storage heaters.

Another energy source is geothermal energy, but you need to already have a geothermal system in your home. There is also natural gas, which powers tankless and conventional storage water heaters. It is also used to power a combo of water and space systems, which includes indirect and tankless coil heaters.

Propane is widely available throughout the USA. This type of fuel source also powers tankless heaters, conventional storage heaters and indirect water and space heaters. Solar energy is available in areas of the United States, but it is usually available in abundance in the Southwest, and it’s used to power solar water heaters.

4. Compare Costs And Types Of Water Heaters- If you have numerous options for fuel in your area, then take the time to compare fuel costs. Do this even if you’re just replacing a water heater because you may end up saving money in the long run. Contact utility companies and get a quote on rates and fuel costs.

Remember, your water heating costs will be affected by the kind of water heater you decide to buy, so it’s wise to take your time when shopping around for one. One kind of heater may use a certain type of fuel much more efficiently than another type of heater. For example, if you get an electric pump heater, than the chances are it will be more energy efficient than a storage water heater that runs on electricity, and the electric heat pump heater may save you money because of lower energy costs, and it tends to be more efficient than storage water heaters that are powered by gas and fire. All you have to do is take the time to compare fuel types and water heaters and then you can decide which type you should choose.

How To Choose The Best Sump Pump To Use In Your Basement

Sump Pump Defined

Before you can choose the best pump to use in your basement, you first need to understand what they are. A sump pump is a kind of electric power pump that gets installed on your basement floor.

The Purpose Of A Sump Pump

A sump pump’s main purpose is eliminating any unnecessary water from an area whenever it is raining hard. This tool is critical to have in your basement during the winter season and hurricanes.

Different Kinds Of Sump Pumps

Different types of sump pumps are needed for different basements. That is why it’s so important to choose the right pump carefully that will work well. The following are seven different kinds that you can choose from for your basement.

1. Primary pumps have been designed for moving gallons of water that have flowed in from the rain to outside of your basement.

2. A submersible primary pump isn’t quiet when it is running but there is a reduction in noise level since the impeller and motor work underwater. Throughout a downpour this kind of pump works smoothly.

3. A pedestal pump has been designed to be used in a small basin that is installed within a narrow pit. The pump motor is over the pit and the base of the pump is submerged.

4. A backup with float switch can supplement a primary pump when there is an unexpected loss of power.

5. DC backup is a type of battery-powered unit. When AC power goes down it switches over to battery mode.

6. AC/DC has a primary as well as built-in back system for pumping on DC and AC power.

7. Sewage pumps get installed within a basement bathroom either within a separate pump chamber or in the septic tank. They are designed for expelling water and solid waste into a septic system.

Primary Sump Pump – Common Limitations

There are three major limitations:

Excessive Use – These pumps are made to last over five years, however they can give up easily when used too excessively. What excessively refers to is being used on a daily basis for over 24 hours of nonstop usage or used even when it isn’t necessary.

Mechanical failure – Sometimes homeowners buy equipment that basement waterproofing experts do not strongly recommend. Therefore, it breaks easily.

Power outages – When there isn’t any electricity non-battery operated pumps are unable to function.

Are there backup pumps available for purchase that use traditional batteries?

The answer is yes.

What is the difference between a backup pump with maintenance free or traditional batteries?

Traditional batteries have acid and occasionally water is added to them to keep them functioning properly. Maintenance-free batteries only need timer setting to be done.

How to choose the best sump pump to use in your basement.

Step 1: Select the pump that requires the least amount of maintenance and correct amount of horsepower (HP).

A larger sump pit is required for a higher horsepower pump. A 1/3 HP sump pump is required for an average-sized house with an average water table. The water table is the upper limit of ground area completely saturated in water.

A sump pump with 1/2 HP is needed for an average-sized house with above-average water table.

A sump pump with 3/4 HP is needed for house that are susceptible to flood due to a high water table.

If you aren’t sure what kind of water table you have, check with an expert at a local basement waterproofing company.

Step 2: Select the battery backup pump that best fits your budget and needs.

Step 3: If your basement has a functional bathroom, have a heavy-duty sewage pump system installed.

Step 4: Select a pump with a longer warranty.

Step 5: Search for one made out of cast iron, that can handle a basement’s wear and tear.

Installing A Sump Pump

Step 1: Diagnose what your problem is.

Step 2: Dig the pit.

Step 3: Get the system installed.

Keep in mint the best thing to do is hire a professional to install your sump pump.

Contacting a basement waterproofing expert to install your sump pump.

Step 1: Research your city’s best basement waterproofing company. For instance, if you live in Chicago, just type in “basement waterproofing in Chicago” and a list of companies will be returned with their phone numbers and addresses.

Call these companies and talk to a basement waterproofing specialist.

Step 2: If you aren’t in a rush, you can email the customer service department. Ask questions like how much it will cost to waterproof the floors and walls of your basement or set a free inspection scheduled.

Midwest Plumbing Pros Service Areas

Any time that you need to be sure that you are able to get high quality plumbing service, the Midwest Plumbing Pros are exactly what you are looking for. We are great at the services that we provide and would be more than happy to assist you in that regard. We service the Chicago area, including the neighborhoods of Hyde Park, Morgan Park, Beverly, Clearing, Gresham, Pullman, South Shore, Washington Heights and other area. If you need any sort of plumbing work that will be useful to you, reach out to our company for more help.

What kinds of services do you provide?

Any time that you need high quality service for utilities, it is important that you reach out to a professional company. We offer a large deal of services that you can take advantage of. Some of these services include dealing with plumbing clogs, clearing drains, dealing with floods, preventative maintenance plans, the insulation of pipe’s, installing plumbing appliances and more. Doing this will allow you to always keep tabs on your household and the level of plumbing work that you need.

When you get high quality plumbing service and keep tabs on it, your home will be well taken care of over the long haul. Your utilities account for so much of your household and will give you the opportunity to keep your home working for you. You will also notice that your utility bills will be less expensive because you are making better use of your water and HVAC service at the same time. Quality plumbing work will allow you to be more judicious with how your water is spent over the long haul.

Why should I hire your professional services?

You could always handle some plumbing work on your own, but there is no substitute for getting the help of a professional. These professionals will allow you to continuously keep this plumbing work up to par for as long as you need it. You will prevent wear and tear on your plumbing that is completely avoidable whenever you leave that work to professionals. We will be more than happy to help you out in this regard.

How can I hire you for the help that you need?

When you need the help of professionals that work with us, simply get in touch to receive a quote and a consultation on any kind of service that you need.

7638 S. Peoria 2nd Floor

Phone: 312-967-4701
URL of Map

Servicing The Following Zipcodes

Albany Park Andersonville Archer Heights Ashburn Auburn Gresham Avalon Park Avondale Back of the Yards Belmont Cragin Beverly Bridgeport Brighton Park Bronzeville Bucktown Burnside Calumet Heights Chatham Chinatown Clearing Dunning East Side Edgewater Edison Park Englewood Forest Glen Gage Park Galewood Garfield Ridge Gold Coast Greater Grand Crossing Greektown Hegewisch Hermosa Homan Square Humboldt Park Hyde Park Irving Park Jefferson Park Kenwood Lake View Lincoln Park Lincoln Square Little Italy Little Village Logan Square The Loop Magnificent Mile McKinley Park Montclare Morgan Park Mount Greenwood Near North Side Near West Side New City North Park Oakland O’Hare Old Town Pilsen Printer’s Row Pullman River North Riverdale Robert Taylor Homes Rogers Park Sauganash South Chicago South Deering South Shore Streeterville Ukrainian Village Uptown Washington Heights Washington Park West Elsdon West Ridge West Town Wicker Park Woodlawn Wrigleyville

Servicing the following zip codes:


Rodding Chatham 60619

Are the drains in your home draining slowly, or not at all? Have you noticed that your toilet tends to clog, or that sewage has backed up into your basement? If so, it may be time to have your sewer line cleaned out.

Sewer Rodding Chatham Chicago 60619

When you need sewer rodding services, you need to give us a call at Midwest Plumbing Pros. We offer the best and highest-quality service in the Chatham neighborhood of Chicago. Our plumbing company is one of the top companies in the state of Illinois, so you can always feel confident that we will give you the help you need to get things moving again.

Over time, pipes and sewer lines tend to become more and more clogged, even if nothing unusual has been put into them. Just ordinary waste water contains enough that the pipe will slowly begin to grow narrower. This makes it harder and harder for the water to flow through it.

Eventually, your pipes will become so clogged and blocked that the water just does not want to move. This is when it starts to back up into your home, and you probably know what a mess that can be. To avoid such situations, you need to give us a call and schedule a sewer rodding.

Our experienced staff has been serving people in the Chatham area for many years, so we have seen it all. We know exactly how to deal with any situation that we may encounter. You can feel confident that you will receive the highest quality of professional service when you schedule an appointment.

Even if you are not experiencing any problems with your pipes and drains, it is still a good idea to call us to schedule a cleaning. As they say, an ounce of prevention is worth a pound of cure. If you have your sewer line cleaned out on an annual basis, you are much less likely to experience any serious problems.

Our skilled and experienced technicians are all trained to the highest standards, so you do not have to worry. They are equipped to handle any situation. We have access to all the latest equipment, so we can deal with any sewer line, no matter how clogged or blocked it may be.

Clearing out a significant amount of blockage can take some time, but we will do so as quickly and efficiently as possible. We work hard to make sure that we get your problem solved with the minimum amount of disruption. We will always treat you with professional courtesy and explain everything that we will be doing. If you ever have any questions or concerns, do not hesitate to ask and we will answer them to the best of our ability.

When you are having trouble with your sewer line, just pick up the phone and call us at Midwest Plumbing Pros. We offer the best sewer rodding services in the Chatham area of Chicago. Call 312-967-4701 today to learn more about our company.

7638 S. Peoria 2nd Floor

Phone: 312-967-4701
URL of Map

How You Can Get Rid a Drain of an Unpleasant Sewer Gas Smell

There are a number of different things that can cause the smell of sewer gas to enter your home. It can be caused by drain buildup, sewer blockage, and a number of other factors. You may only be experiencing the smell of sewer gas, or actual sewer gas may be entering your home. Whatever the problem is, there are a number of ways that it can be fixed. Having your drain repaired or cleaned or replacing damaged parts will allow you to get rid of the smell and get your drain back to normal. If these fixes don’t help, talk to a plumber.

The first thing you should try is pouring between one and two quarts of water down your drain. This is often enough to clean out the drain and get rid of the smell.

pour bleach down sewerIf that doesn’t work, take the strainer off your drain. Soak the strainer thoroughly while you spend time cleaning out the drain pipe.

Use a scrub brush with nylon bristles to clean out the inside of the pipe. After you’ve scrubbed it throughout, pour clean water down the drain to wash everything away.

Once the strainer has soaked, take it out and scrub any remaining grime away. Rinse it off, and put it back on the drain.

If that doesn’t fix the problem, go up on your roof and take a look at your vent pipes. Something like a bird’s nest could be clogging the pipe and blocking sewer gasses in your drain. If you remove it, the gasses will be able to escape.

If the smell is coming from your toilet, you may also want to try shutting off your toilet’s water supply. This can be done with the valve that’s under the water tank. Flush out the tank, and then turn the water back on.

If that isn’t enough to address the problem, there are some additional things you could try. You could shut the water back off and remove the supply line from your tank. You could remove the flange and wax ring and replace any parts that are badly damaged. Take a look at your toilet and see if anything looks like it’s in need of repair.

Even if you’re not a plumber, getting rid of a sewer drain smell can be an very easy task. Try these simple steps and see if they help to resolve the problem. If they don’t, you’ll be able to bring in a professional knowing that you tried everything that you possibly could.

Midwest Plumbing Pros – Sewer Gas Plumber Chicago

MidWest Plumbing Pros
7638 S. Peoria 2nd Floor




Phone: 312-967-4701
URL of Map


Neighborhoods In Chicago:

Chatham 60619

What should I know about BackFlow Water?


When contaminated or polluted water goes in the wrong direction and flows back toward its source, it is called backflow. This is most often caused by back-siphonage or back-pressure. When the pressure already in the pipes is higher than that which is entering the pipes, then that is called back-pressure. When one of the pipes has negative pressure, it is back-siphonage.


Sewer backflow PreventionWe always work to protect the health of the public at Midwest Plumbing Pros. We have professionals who are very well trained and are capable of assessing your business and/or home in detail to judge if the plumbing will be susceptible to backflow and to help you pick the right backflow assemblies. There are two types of prevention of backflow that all businesses are compelled to have.

There is the external assembly which will prevent cross connection with city water at the business location. The other type is internal and is designed to protect the customer from a dangerous cross connection. To make sure these assemblies are working properly, they should be tested every year.


For commercial properties, all cities require yearly testing for backflow. Midwest Plumbing can perform this testing and will send a reminder that re-certification is due so that your property will always be in accord with local regulations and codes.


The Safe Drinking Water Act (SDWA) was created in 1974 by Congress. It was designed to protect Americans health from any contaminates that might be found in the drinking water and to keep existing groundwater from becoming contaminated. In 1986 and 1996, this Act was amended to make it mandatory to have backflow prevention assemblies installed and taken care of at a water service connection. This is the spot where there is a possible danger of cross contamination, which can be a threat to the backflow system of the customer.

Midwest Plumbing Backflow Service

We at Midwest Plumbing are pleased to offer a 1-year warranty on materials and workmanship on all new installations of backflow assemblies.

More Information Below:

You can count on Greenville Utilities to provide you with safe, fresh, clean water. We are dedicated to that goal and committed to your safety. That’s why we want to make sure you know how to prevent backflow.

What is Backflow?
Most of the time water flows “forward” from the water distribution system into your residence. Backflow is the term used to describe the “backward flow” of water. In other words, backflow would occur when water from your home “flows back” into the water supply. Backflow can also be caused when water from a garden hose “flows back” into your home. If water flowing backwards contains hazardous chemicals or bacteria, it can cause an unhealthy or dangerous situation.

How Does It Occur?
Backflow can occur because of something as simple as an ordinary garden hose. As an example, you are washing your car and the phone rings. You leave your garden hose in a bucket of soapy water. While you are on the phone, a water main breaks down the street and the water pressure quickly and momentarily has a significant drop, creating a vacuum. Like sucking on a straw, the vacuum could pull the soapy water into your home’s water system. At the same time, your spouse gets a glass of water from the kitchen faucet. What should be a refreshing drink actually ends up being contaminated by the effects of backflow.


Related: Sewer Backflow Service
Midwest Plumbing Pros – Toilet | Drain Service | Clogged Bathtub

   Midwest Plumbing Pros

     7638 S. Peoria 2nd Floor

Phone: 312-967-4701
URL of Map

Cities in Service Area:

Chicago | Naperveille |

Neighborhoods In Chicago:

Chatham 60619

The Benefits Of Opting For A Gas Hot Water Heater

In the event that your hot water heater requires replacement and you are confused as to the type of heater you should obtain, you should consider a gas water heater. If you have the facility to switch to this type of heater as you already have gas in your home or it is available in your area, you should obtain information regarding the installation of a gas water heater.

Gas water heaters are known to be more economical than electric versions. They also tend to last longer than their electric counterparts and you may not have to replace it for many years. As far as the costs for usage go, the prices may not differ very much, but this is dependent on the unit charge in your area.

There are a few factors you have to consider before you make the switch to a gas water heater.

The first consideration to make is the recovery rate between electric and gas water heaters. This is the figure which indicates how many temperature degrees a specified amount of water is heated, within a specified period of time. From a user’s perspective, a shorter recovery time allows you to drain your hot water heater completely and return to use it in a shorter space of time. Generally, a gas water heater will have a shorter recovery time than an electric version of equal size. This implies that you could opt for a smaller gas water heater for the same number of people in the house, and not have to offer up any additional time at all. A smaller tank saves money as there is not the requirement to heat huge amounts of water all the time.

Gas HoT Water Heater Tanks – Chicago

The cost of purchase and installation is a factor that should be considered carefully. Gas water heaters are generally more expensive to purchase than electric water heaters. There are, however, gas companies that offer rebates to aid in this price variance. It is recommended that you contact your local gas company and ask if they offer a price reduction.

Signs That You Need A Gas Water Heater – Chicago

Another factor to consider is the placement of a flue close to where you need to place the heater. This will allow the technician to access the flue for ventilation purposes, thereby removing the need to create new ventilation pipes. If you feel that this is an unwarranted cost, you should consider that if you were to change from gas to electric, you would have additional costs for a new double circuit breaker and wiring.

The costs of usage could vary considerably, but this is dependent upon the area you reside in. In most areas within the US, gas costs much less than electricity when it comes to heating water. This figure could be as big as 30% to 40%, depending on the rates of electricity in your residential area. To obtain an accurate assessment of the difference in cost between the two, you can go online and enter estimated usage figures for the calculation.

If you are considering a change in the type of water heater you currently use or you are forced to replace your current heater, you should bear in mind the differences in cost to purchase, install and run the different types of heaters.

  • water heater thermostat troubleshooting
  • hy does your gas hot water heater pilot keep going out
  • do it yourself gas hot water heater
  • 7638 S. Peoria 2nd Floor

    Phone: 312-967-4701
    URL of Map

    Cities in Service Area:

    Chicago |

    What To Find In A Sump Pump

    Buying a new sump pump to keep a basement dry is something that a lot of people will need to do at some point in time. The problem that people are going to encounter is going to be not knowing what to find in the sump pump they need for their homes basement. By knowing what to find in these pumps, people can easily find the right pump and know that the basement is going to be protected from the flooding that can happen when people are experiencing heavy rain.

    The first thing that people need to look for is the type of connectors the sump pump has on it. These connectors are generally going to be the connectors that will hook the pump up to the pipe or hose that is going outside. By knowing about this, it is going to be easy for people to find the right pump and know that the hose they have will hook right up to the pump, instead of having to find the right connection for the pump.

    Best Sump Pump Plumber In Chicago

    A second thing that people need to find in the pump is going to be the flow rate of the pump. Hopefully people never have to deal with this problem, but they need to make sure the sump pump has a flow rate that is fast enough to keep up with the amount of water that is coming in. So people should make sure the pump can handle all the water that is coming in because this is important for people to consider when they are trying to get the water out of the home.

    Finally people need to make sure they are looking at the different ways the sump pump is going to be set up. Typically the pump will sit down in a well, but people need to make sure they have the right well for the pump to fit down into. So people need to make sure this is going to be what they want to have.

    Having to buy a new sump pump for a basement is something that will happen to people at some point if they want to have a consistently dry basement. The problem that people have on a regular basis is not knowing what to look for in these pumps. By learning more about what they should find in these pumps, they can easily select the right pump and know it will work for them.

    7638 S. Peoria 2nd Floor

    Phone: 312-967-4701
    URL of Map

    Cities in Service Area:

    Chicago |

    Diagnosing and Repairing Leaky Sewer Gas Issues in the Home

    When a nasty smell presents itself through your plumbing, you’ve got a problem. What kind? Well, bad odors can mean any number of things, whether it’s a leak in the toilet or a fracture or blockage in the venting pipes. Sometimes the perfect storm happens where a vacuum is created in the system. This happens when air is not reaching the drain of your sink. Flowing water then creates the vacuum, sucking water out of the bottom of P-traps. The only way around this is to clear the vents. If that’s sounds like a diagnosis of your plumbing, read on to find out how to clear blockages.

    First, you’ll need to pinpoint where the offending smell is coming from. If it’s coming from a toilet, there may be something bigger than just a blockage going on here. But if your smell is coming from a drain, your vents are, in all probability, blocked up. Suppose you smell something coming from the wall. This could indicate a fractured or disconnected vent pipe in need of fixing. The only way to get at it is going to be to take off the drywall.
    So how do you fix the toilet? You might want to roll up your sleeves first; this is going to be a big job. It’s paramount that you first turn off the water and drain the tank. Then take the whole unit off its floor mount using the appropriately sized wrench. Now inspect the floor for water damage. If it is present, make sure it is cleared up before the bowl and tank go back on.

    Eliminating A Sewer Odor From Your HomeClogged Drain

    If the flange is lower than a half inch under the floor, it will need to be lifted. A low flange can spell disaster for the wax ring since it cannot engage along the waste line. This leaves the door open for all kinds of unpleasant smelling gasses to permeate the bathroom air. To fix the flange, you’ll need to get a flange extender. Unscrew it, install the extender on top, and then replace the bowl.
    What if you think your P-trap is blocked? To find out for sure, you’ll need to dump water down the drain. Then flush the nearest toilet. If you hear gurgling and sucking sounds, you know you’ve got yourself a P-trap blockage.
    Clearing vents is sometimes as simple as getting up on your roof to check vents for debris, like leaves, sticks, or any number of things that might’ve fallen in over the years. You might be surprised by what you find.
    If the opening isn’t blocked, get off the roof, activate your garden hose, and bring it on up, taking care not to slip by the wet surface the hose creates. Stick the hose in the vent. It’s possible the water may get rid of any unseen obstructions. If it doesn’t it will overflow back onto the roof, and you’ll know you’ve got a real tenacious bit of gunk down below.
    The insertion of an auger into the vent can get rid of that stubborn gunk. Ram it down the vent, cranking the handle to stir it through the blockage. After it’s been cleared, the water may drain. Repeat the previous test to make sure you don’t have another overflow. If you don’t, you’ll know your vent is open now. Problem solved.
    There’s a reason you had a problem in the first place. After treating the symptom of getting rid of the blockage, you need to fix the joints in your pipes. Plastic cement works well for this and will ensure that your vents are clear for a long while to come.

    7638 S. Peoria 2nd Floor

    Phone: 312-967-4701
    URL of Map

    How To Install A Catch Basin

    The installation of a catch basin can provide a solution to majority of your drainage problems be it in a commercial parking lot or your yard. Many individuals face the problem of water stagnating on their property due to poorly drained soils or terrain. Low and relatively flat areas in a lawn or garden can be ruined by stagnating water since the captured rain water tends to create some ponds and pools of water that can be a nuisance and a hindrance to some of the basic farming activities.

    With the stagnation of the water, the soil becomes clogged and turns into mud. This can have some very adverse effects to the growth of your plants. In most cases, soils that are water-logged provide unfavorable conditions for plants to thrive. This can result into the plants drying and withering up. So as to solve the problem of water-flooding and stagnation, catch basins can be installed. These are special types of equipment that can be used to keep the amount of stagnating water in check. This means that the equipment has the capability of containing or draining away excess surface water.

    Clean Your Catch Basin Sewer Plumber – Chicago

    Catch basins come with different sizes, types and shapes. In addition, they come with different materials with the most common materials of manufacture being PVC, plastic and concrete. If you want to install a catch basin that requires heavy material, you can choose to construct one all by yourself. The size of the catch basin is usually determined by the extent to which the ponding issue is severe. If the flooding is just occasional, the installation of PVC pipes could suffice. These are highly preferred since they are lightweight, easy to handle and easy to install.

    If the water problem is immense, the installation of concrete basins could be ideal. These are extremely heavy and special type of machinery is required to move them to the point of installation. Concrete catch basins are relatively large which makes them ideal for the collection of large volumes of water.

    When installing the basin, it is essential to have a hole cast at its bottom. This enables the basin to trap rainwater during a storm and drain it down to the ground. This means that at no time shall your earth surface remain flooded with rainwater. The magnificent bit about concrete catch basins is that they are durable. Some of them can even outlast you.

    The installation of a basin is quite easy and straightforward. You should only take some extra caution if your basin will have an outlet pipe. This is because the outlet pipe must be installed in a manner and direction that allows for easy draining of the trapped rain water. It is also important to install the basin at the foot of a sloppy terrain so that all the rainwater flows into it without much hindrances.

    After the basin has been install, proper care and maintenance is required. It is imperative that the equipment has no debris for maximum and optimal efficiency in the control of floods and water stagnation.

    7638 S. Peoria 2nd Floor

    Phone: 312-967-4701
    URL of Map